[MPIWG Fortran] Draft chapter for discussion today
Jeff Squyres (jsquyres)
jsquyres at cisco.com
Thu Jan 16 13:13:06 CST 2014
We tweaked the document a bit more on the call; here's the final result.
On Jan 16, 2014, at 11:18 AM, "Jeff Squyres (jsquyres)" <jsquyres at cisco.com>
wrote:
> Sure -- we're starting in about 40 minutes (noon, US Eastern time).
>
> Here's the content from the invite:
>
> The main point of this meeting is to discuss 2 MPI-4 proposals that Jeff will have ready:
>
> 1. Deprecate mpif.h. Rolf's suggestion:
>
> MPI-3 p603, chap 17.1.4
> 1st para -- "mpif.h is strongly discouraged and may be deprecated..."
> --> change to "is deprecated and may be deleted..."
> --> Add (short) AtoU, if you have software using mpif.h, you should
> change it thusly... (see page 603 line 15-17 for
> inspiration/copy)
>
> 2. Freeze the mpi module (no new features). The intent is to focus all of our energies on the mpi_f08 module in the future. If there is push back on this from the Forum, our plan B for this is to modernize the mpi module (i.e., add all the features to the mpi module that we added to the mpi_f08 module). Rolf's suggestions:
>
> --> Add AtoU encourage users to move to mpi_f08
>
> --------
>
> **** You can forward this email invitation to attendees ****
>
> Hello ,
>
> Jeff Squyres invites you to attend this online meeting.
>
> Topic: MPI Forum Fortran WG
> Date: Thursday, January 16, 2014
> Time: 12:00 pm, Eastern Standard Time (New York, GMT-05:00)
> Meeting Number: 203 787 876
> Meeting Password: mpi
>
>
> -------------------------------------------------------
> To join the online meeting (Now from mobile devices!)
> -------------------------------------------------------
> 1. Go to https://cisco.webex.com/ciscosales/j.php?ED=248676957&UID=0&PW=NY2UzZmNiNWY3&RT=MiMxMQ%3D%3D
> 2. Enter your name and email address.
> 3. Enter the meeting password: mpi
> 4. Click "Join Now".
>
> To view in other time zones or languages, please click the link:
> https://cisco.webex.com/ciscosales/j.php?ED=248676957&UID=0&PW=NY2UzZmNiNWY3&ORT=MiMxMQ%3D%3D
>
> ----------------------------------------------------------------
> ALERT – PLEASE READ: DO NOT DIAL THE TOLL FREE NUMBERS FROM WITHIN THE (408) OR (919) AREA CODES
> ----------------------------------------------------------------
> Please dial the local access number for your area from the list below:
> - San Jose/Milpitas (408) area: 525-6800
> - RTP (919) area: 392-3330
>
> Dialing the WebEx toll free numbers from within 408 or 919 area codes is not enabled (non-Cisco phones). “ If you dial the toll-free numbers within the 408 or 919 area codes you will be instructed to hang up and dial the local access number.” Please use the call-back option whenever possible and otherwise dial local numbers only. The affected toll free numbers are: (866) 432-9903 for the San Jose/Milpitas area and (866) 349-3520 for the RTP area.
>
> -------------------------------------------------------
> To join the teleconference only
> -------------------------------------------------------
> 1. Dial into Cisco WebEx (view all Global Access Numbers at
> http://cisco.com/en/US/about/doing_business/conferencing/index.html
> 2. Follow the prompts to enter the Meeting Number (listed above) or Access Code followed by the # sign.
>
> San Jose, CA: +1.408.525.6800 RTP: +1.919.392.3330
>
> US/Canada: +1.866.432.9903 United Kingdom: +44.20.8824.0117
>
> India: +91.80.4350.1111 Germany: +49.619.6773.9002
>
> Japan: +81.3.5763.9394 China: +86.10.8515.5666
>
> -------------------------------------------------------
> For assistance
> -------------------------------------------------------
> 1. Go to https://cisco.webex.com/ciscosales/mc
> 2. On the left navigation bar, click "Support".
>
> You can contact me at:
> jsquyres at cisco.com
> 1-408-525 0971
>
> To add this meeting to your calendar program (for example Microsoft Outlook), click this link:
> https://cisco.webex.com/ciscosales/j.php?ED=248676957&UID=0&ICS=MI&LD=1&RD=2&ST=1&SHA2=AAAAAmq524Xr8fSGIfklv5EW9qFpNjnZuGzsEZOppDaCchyJ&RT=MiMxMQ%3D%3D
>
> The playback of UCF (Universal Communications Format) rich media files requires appropriate players. To view this type of rich media files in the meeting, please check whether you have the players installed on your computer by going to https://cisco.webex.com/ciscosales/systemdiagnosis.php.
>
>
>
>
> http://www.webex.com
>
> CCP:+14085256800x203787876#
>
> IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation.
>
>
>
>
>
>
> On Jan 16, 2014, at 11:01 AM, Bill Long <longb at cray.com>
> wrote:
>
>> Hi Jeff,
>>
>> Just starting another meeting. Hopefully I’ll be out in time. Before them, could you resend the webex link - I got a new computer at work with software that seems to delete the email message if you “accept” a meeting.
>>
>> Cheers,
>> Bill
>>
>>
>> On Jan 16, 2014, at 9:03 AM, Jeff Squyres (jsquyres) <jsquyres at cisco.com> wrote:
>>
>>> Here is a first cut of the language bindings chapter with changes to:
>>>
>>> 1. deprecate mpif.h
>>> 2. freeze the mpi module
>>>
>>> Look for "ticketWG" to see the changes -- I used the standard MPI update/replace macros, so all the changes are easily located. We'll talk through this text on the webex today. The intent is to introduce a ticket (or two?) at the next meeting for 1. and 2.
>>>
>>> Note that this PDF does *NOT* reflect the recently-passed tickets for fixing the "linker name" language, etc. This PDF draft for discussion on the webex today is simply the MPI-3.0 text with my updates for 1. and 2.
>>>
>>> Updating the MPI-3.1 directory in SVN to include the text from the recent tickets will be a separate effort.
>>>
>>> --
>>> Jeff Squyres
>>> jsquyres at cisco.com
>>> For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/
>>> <binding-2.pdf>_______________________________________________
>>> mpiwg-fortran mailing list
>>> mpiwg-fortran at lists.mpi-forum.org
>>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-fortran
>>
>> Bill Long longb at cray.com
>> Fortran Technical Suport & voice: 651-605-9024
>> Bioinformatics Software Development fax: 651-605-9142
>> Cray Inc./ Cray Plaza, Suite 210/ 380 Jackson St./ St. Paul, MN 55101
>>
>>
>> _______________________________________________
>> mpiwg-fortran mailing list
>> mpiwg-fortran at lists.mpi-forum.org
>> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-fortran
>
>
> --
> Jeff Squyres
> jsquyres at cisco.com
> For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/
>
> _______________________________________________
> mpiwg-fortran mailing list
> mpiwg-fortran at lists.mpi-forum.org
> http://lists.mpi-forum.org/mailman/listinfo.cgi/mpiwg-fortran
--
Jeff Squyres
jsquyres at cisco.com
For corporate legal information go to: http://www.cisco.com/web/about/doing_business/legal/cri/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mpi-forum.org/pipermail/mpiwg-fortran/attachments/20140116/eebeaac6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: binding-2.pdf
Type: application/pdf
Size: 464065 bytes
Desc: binding-2.pdf
URL: <http://lists.mpi-forum.org/pipermail/mpiwg-fortran/attachments/20140116/eebeaac6/attachment-0001.pdf>
More information about the mpiwg-fortran
mailing list